March 18, 2019
March 26, 2018
March 7, 2018
Dr. Thomas Gischkat from RhySearch contacted us with the idea if we can bond a Silicon Target with an Aluminium inlet together.
His idea is to co-sputter these 2 materials to get special properties which nobody achieved so far.
September 15, 2017
We bond our sputtering targets since over 5 years now. We decided that it is time to get ISO certified to show to our customers the dedication to serve the needs on the market.
Congratulation to our team, which was really committed to get it done in a reasonable short t...
November 25, 2016
Alja Plosnik, PhD
Is your workplace safe?
If you use NMP, TMAH, DMSO, DMF, etc. it is not!
All these chemicals are listed as substances with very high concern for human health and environment.
Therefore is a need for new alternatives, which cleaning performance is as good or better than wi...
November 16, 2016
Most of us know that a real arc can disrupt our process and chamber parts which results in a measureable loss.
But do you know the impact of micro arcs and the influence on your process?
How could you measure micro arcs? Which solutions exist on the market?
November 13, 2016
We started to introduce this new product about 6 months ago and the customers who tested and installed it see a great improvement in their uptime and much less maintenance work required.
X-Hot is installed after the pump. A small heater heats the N2 up to 150 Degree C....
November 6, 2016
One of our newest products we offer are Aluminium showerheads where we implanted N2
There are 2 main benefits for our customers:
1) less particles
2) longer lifetime without changing your process parameters.
Please contact us: firstname.lastname@example.org
to learn more about this
November 5, 2016
Many of our customers are using Ceramic CVD heaters. They had 2 topics where we were not able to help, but found thanks to DJ Chang a great solution:
The new product is called HEMOS and allows you to measure the film thickness while you are processing the wafers in your...
April 14, 2016
Wir suchen einen neuen Office Manager!
Custom made Thermo Couple wafers
Si-Al Combination Target
We are ISO Certified!
Environmental friendly Photoresist Remover from Dynaloy
Detect Micro-arcs in your Plasma chamber
Clogged Forelines? More uptime, X-Hot keeps your foreline clean.
Yield improvement with improved CVD Showerheads
New product to monitor the insitu coating thickness and heater health on a CVD process
APCM Conference in Reutlingen
March 2019 (1)
March 2018 (2)
September 2017 (1)
November 2016 (5)
April 2016 (1)
September 2015 (1)